View source for Earplugs

[[Category:Protective Gear]]
====Why earplugs?====

There is absolutely no doubt that exposure to noise levels in excess of 100 db causes cumulative hearing damage. Worse yet, this is hearing loss that you can never recover. Once it goes away, it's gone forever. Eventually you are likely to develop tinnitus, a constant 'singing' or 'whistling' in your ears that overlays everything you hear. No fun. 

The best solution is a pair of custom fitted earplugs made by an audiologist. These are cast out of space age polymers from molds made in your own ears and contain a tiny valve that allows low level sounds to be heard, while at the same time cutting out everything that's above a given sound pressure. You can still hear sirens, horns, and so forth, but the wind noise is pretty much gone. (And that constant wind noise really tires you out. Try it and see.) Most riders use disposable store-bought plugs and are quite content with them.  They can be found in the pharmacy section of many stores.

=='''Earplug survey'''==

''Written June 24, 2005''   <br>
by IanJ

Several years ago, I bought a box of 200 pairs of 3M 1100 earplugs
online.  When these ran out, I bought a box of 200 pairs of Moldex
Pura-Fit plugs, but discovered that they didn't seal in my right ear
very well, leaving me feeling like my head was on sideways.

The 1100s had served me well, but when they ran out and the Moldexes
didn't live up to my expectations, I thought I'd take advantage of
a "sampler pack" offered by [http://earplugstore.stores.yahoo.net/ The Ear Plug Store]. (Yes,
they have <i>everything</i> on the Internet!)

They shipped me, for the princely sum of $11.95 plus shipping, two
pairs each of 13 different brands and models of disposable, uncorded foam
earplugs.  The models are as follows, in descending order of Noise
Reduction Rating (NRR) value:

*Aearo/E-A-R Soft Blast
*Howard Leight MAX
*Aearo/E-A-R Classic SuperFit
*Howard Leight LaserLite
*Moldex Spark Plugs
*Moldex Pura-Fit 
*Hearos Super Soft
*Howard Leight MaxLite
*Hearing Technologies
*Howard Leight Matrix 
*3M 1100
*Flents Quiet Please (Hexagonal)
*Aearo/E-A-R Classic

I sat down and tried each one in turn, and took notes on what I
thought.  Omitting my singular problem of having a right ear canal one
size larger than the left one, the notes I took seemed useful. So, I
decided to more formally rate the different plugs based on my
first-hand observations.

For these ratings, I took the following factors into account:

<b>Packaging</b>: how hard to open? how bulky/wasteful? how likely to
make me drop an earplug on the dirty, gritty ground, destroying it for
my use?

<b>Expansion speed</b>: do the plugs expand too fast or slow to be
useful?

<b>Pressure</b>: how much pressure do I feel on my ear canals
once they're fully expanded? (ie, how much will they suck 2 hours from
now?)

<b>Comfort</b>: how comfortable are they to put in? to take out?  to
have in, aside from pressure?

I dig numbers, so I've given each plug a potential ten in each
category, for a possible total of 40.  Points are deducted
depending on how much each plug sucks in that category.  I've also
included a size assessment, which is my personal opinion on whether the
plug is small, average, or large in size.  (This will affect your comfort 
rating.)

Note that these ratings do not take NRR into account.  All these
plugs range from 29 to 33 NRR, which are all great for motorcycling, so
I don't consider NRR to be a rating-worthy factor until you've found
the one or two you like.  Then, higher NRR makes a difference.

<table border=1 cellpadding=3>
<tr>
<th> Picture </th>
<th> Plug </th>
<th> Size </th>
<th> Packaging </th>
<th> Expansion speed </th>
<th> Pressure </th>
<th> Comfort </th>
<th> Total </th>
</tr>
<tr>
<td rowspan=2> <center>[[Image:IJ 1.jpg|150px]]</center> </td>
<td> Moldex Pura-Fit </td>
<td> Average </td>
<td align="center"> 9 </td>
<td align="center"> 9 </td>
<td align="center"> 8 </td>
<td align="center"> 8 </td>
<td align="center"> 34 </td>
</tr>

<tr>
<td colspan=7> Paper package is nearly perfect, just a bit large.  Very long plugs inspire me to insert them deeper than other plugs, which can be uncomfortable or painful, but very comfortable when properly inserted.
</td>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 2.jpg|150px]]</center> </td>

<td> Howard Leight LaserLite </td>
<td> Average </td>
<td align="center"> 9 </td>
<td align="center"> 8 </td>
<td align="center"> 8 </td>
<td align="center"> 8 </td>
<td align="center"> 33 </td>
</tr>

<tr>
<td colspan=7> Howard Leight plugs all have excellent packaging, except it's a touch too big.  Very easy to open, very unlikely to dump plugs on the ground. These are very good, but the outer end is shaped a bit strangely, squashed flat. The only difference between MaxLite and LaserLite plugs is the NRR, as far as I can tell.  (LaserLites are NRR 32, MaxLites are
NRR 30.) </td>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 3.jpg|150px]]</center> </td>
<td> Howard Leight MaxLite </td>
<td> Average </td>
<td align="center"> 9 </td>
<td align="center"> 8 </td>
<td align="center"> 8 </td>
<td align="center"> 8 </td>
<td align="center"> 33 </td>

</tr>
<tr>
<td colspan=7> Good plugs, but the weird pinched end detracts from their comfort for me. </td>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 4.jpg|150px]]</center> </td>
<td> Howard Leight MAX </td>
<td> Large </td>
<td align="center"> 9 </td>
<td align="center"> 9 </td>
<td align="center"> 6 </td>
<td align="center"> 8 </td>
<td align="center"> 32 </td>
</tr>
<tr>

<td colspan=7> The MAX plugs are comfortable, but big and flared at the end. </td>
</tr>

<tr>
<th> Picture </th>
<th> Plug </th>
<th> Size </th>
<th> Packaging </th>
<th> Expansion speed </th>
<th> Pressure </th>
<th> Comfort </th>
<th> Total </th>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 5.jpg|150px]]</center> </td>

<td> 3M 1100 </td>
<td> Large </td>
<td align="center"> 9 </td>
<td align="center"> 8 </td>
<td align="center"> 7 </td>
<td align="center"> 8 </td>
<td align="center"> 31 </td>
</tr>
<tr>
<td colspan=7> Packaging is almost as good as the Howard Leight bags, but I know from experience these plugs can pop out and end up on the ground occasionally.  Firm material results in relatively high pressure, but I've comfortably worn them for 4-5 hours at a
stretch.  (Comfort will vary considerably between people.) </td>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 6.jpg|150px]]</center> </td>
<td> Aearo/E-A-R Soft Blast </td>
<td> Small </td>
<td align="center"> 6 </td>
<td align="center"> 8 </td>
<td align="center"> 8 </td>
<td align="center"> 9 </td>
<td align="center"> 31 </td>

</tr>
<tr>
<td colspan=7> Packaging makes it too easy to dump the plugs on the ground, otherwise good.  Ridiculous flame graphic. </td>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 7.jpg|150px]]</center> </td>
<td> Hearos Super Soft </td>
<td> Small </td>
<td align="center"> 5? </td>
<td align="center"> 7 </td>
<td align="center"> 9 </td>
<td align="center"> 9 </td>
<td align="center"> 30? </td>
</tr>
<tr>

<td colspan=7> Plugs came in "aftermarket" resealable bags, probably not how you'd buy them in a multipack, so packaging gets a 5 with a questionmark.  True to their name, very soft and comfortable, but on the small side, both in diameter and length.  I had trouble removing them, they were so short. </td>
</tr>

<tr>
<th> Picture </th>
<th> Plug </th>
<th> Size </th>
<th> Packaging </th>
<th> Expansion speed </th>
<th> Pressure </th>
<th> Comfort </th>
<th> Total </th>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 8.jpg|150px]]</center> </td>
<td> Moldex Spark Plugs </td>
<td> Large </td>
<td align="center"> 7 </td>
<td align="center"> 8 </td>
<td align="center"> 7 </td>
<td align="center"> 7 </td>
<td align="center"> 29 </td>
</tr>
<tr>
<td colspan=7> The packaging on these plugs gives me the "dump on ground" vibe, otherwise good.  Comfort suffers a bit because the base of the cone has a harder edge than surrounding foam, although it's mostly noticeable when rolling them.  Could be an issue after several hours, though.
</td>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 9.jpg|150px]]</center> </td>
<td> Hearing Technologies </td>
<td> Large* </td>
<td align="center"> 7 </td>
<td align="center"> 3 </td>
<td align="center"> 6 </td>
<td align="center"> 7 </td>
<td align="center"> 23 </td>

</tr>
<tr>
<td colspan=7> * Although these are large diameter, they're very short in length, making them hard to remove.  Very slow to expand, so if you get it wrong and have to reseat them, you're going to be standing there with a look of concentration on your face for a while. </td>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 10.jpg|150px]]</center> </td>
<td> Aearo/E-A-R Classic SuperFit </td>
<td> Large </td>
<td align="center"> 4 </td>
<td align="center"> 8 </td>
<td align="center"> 7 </td>
<td align="center"> 1 </td>
<td align="center"> 20 </td>
</tr>
<tr>

<td colspan=7> These plugs are cylindrical, and the flat faces have a hard edge to them which is incredibly uncomfortable.  Cylinder surfaces are rough against the skin.  If your ear canals are surfaced in teflon these might be comfortable.  The packaging is huge and cardboard. Who thought that was a good idea? </td>
</tr>

<tr>
<th> Picture </th>
<th> Plug </th>
<th> Size </th>
<th> Packaging </th>
<th> Expansion speed </th>
<th> Pressure </th>
<th> Comfort </th>
<th> Total </th>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 11.jpg|150px]]</center> </td>
<td> Flents Quiet Please (Hexagonal) </td>
<td> Average </td>
<td align="center"> 2 </td>
<td align="center"> 7 </td>
<td align="center"> 5 </td>
<td align="center"> 2 </td>
<td align="center"> 16 </td>
</tr>
<tr>
<td colspan=7> Packaging is of the "pull, pull, pull, pull, explode!" variety that potato chip manufacturers seem to love.  Hexagonal plug?  Hello? That means 12 sharp points to dig in.  Abysmal comfort, and I couldn't get them to seal well.  Terrible design. </td>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 12.jpg|150px]]</center> </td>
<td> Howard Leight Matrix </td>
<td> Average </td>
<td align="center"> 8 </td>
<td align="center"> 0 </td>
<td align="center"> 4 </td>
<td align="center"> 2 </td>
<td align="center"> 14 </td>

</tr>
<tr>
<td colspan=7> Maybe I misunderstand how to use these things, but they hurt to put in, hurt to have in, and hurt to take out.  Hard edge on the cylinder's flat face.  They expand almost instantly, making them impossible to position.  In my original notes, I wrote "ow!" not once,
but twice.  Between the material and the too-short length, I nearly had to grab pliers to get them out.  Ick! </td>
</tr>

<tr>
<td rowspan=2> <center>[[Image:IJ 13.jpg|150px]]</center> </td>
<td> Aearo/E-A-R Classic </td>
<td> Average </td>
<td align="center"> 4 </td>
<td align="center"> 2 </td>
<td align="center"> 4 </td>
<td align="center"> 0 </td>
<td align="center"> 10 </td>
</tr>
<tr>

<td colspan=7> See my comments above about the Super Classic, but moreso.  These are among the worst earplugs I've ever tried. </td>
</tr>

</table>

<h3> My recommendations </h3>

<table border=1 align="right" cellpadding=1>
<tr><td width=180>

<center>'''Not recommended: SilentEar silicone earplugs'''</center>

<center>[[Image:IJ 14.jpg]]</center>

As part of my quest for good earplugs, I also gave the silicone [http://earplugstore.stores.yahoo.net/silnatrubear.html SilentEar]
plugs a try.  The same site which sold me the assortment of foam plugs
recommends the silicone plugs highly.  Plus, they're reuseable, so
they're more of a one-time investment.  For less than $20 for the size
assortment, I figured it'd be worth a try.

As I'd expected, I needed the medium size in my left ear, and the
large in my right.  They were a little strange to insert, since they
have a slick surface compared to foam plugs, and they need to slide
into place.

A quick test fitting at home seemed to show promise, so I left them
in and got my helmet on to go for a test ride.  I had brought my old
trusty 3M 1100s with me, just in case.  Almost as soon as I got my
helmet on, the right plug developed a "leak" and I could hear at full
volume again from that ear.  I pulled off my helmet, and seated the
plug again.  I got the helmet on without incident, but before I'd even
started moving, the plug was "leaking" again.  I stopped 500 yards down
the road and swapped to the 1100s.

It seemed that even the slightest jaw movement would dislodge one
or both of the plugs.  When they were seated and sealed, they seemed
promising.  Unfortunately, they unseated again so quickly that there
was really no point in pursuing them.

Based on my own experience, I do not recommend these plugs.  They
might be worth a try, but it seems like the chance that they'll happen
to fit you exactly right probably isn't worth the price of admission:
for about the same price, you can get a box of 200 pairs of good foam
earplugs which are much more likely to fit and seal every time.

</td></tr>
</table>
Any of the high-scoring plugs in this comparison seem like a fine
choice.  I really like the Howard Leight packaging, which makes it easy
to get to the plugs without much risk of accidentally tossing them
across the road.

Plug fit is incredibly important, and will determine comfort, noise
reduction, pressure, and how cranky you are at the end of that 500
mile day.  NRR is important, but merely having an earplug is such a
huge improvement over not having an earplug that I recommend you
choose comfort over NRR.  It's vital that you put in the earplugs,
and if they're uncomfortable, you're less likely to do that.

Avoid! avoid! avoid! the plugs rated 20 and under in the list.
They ranged from really uncomfortable to downright painful.  They're
also among the least effective plugs in the range, so there's really
nothing to recommend them.

Price may inspire you to choose bad plugs, but I put it to you
that your hearing is literally beyond monetary value -- once it's
gone, there is no science or magic which will bring it back.  It's
gone forever.  Riding a motorcycle for more than 15 or 20 minutes,
or at speeds higher than 40-50 MPH will damage your hearing,
permanently.

So, I guess my recommendation is order up a pair of each of the
likely looking plugs from the list ([http://earplugstore.stores.yahoo.net/ The Ear Plug Store] will sell you an individual pair of each type, to test), and try them out.  I can
guarantee you that the low-rated plugs aren't even worth trying,
so buying the sampler pack is something of a waste.

Ride with each plug in, ideally back to back and in similar
conditions.  Figure out which one works well for you, then buy a
crapload of them so you never worry about "wasting" them.  These plugs
can all be worn multiple times, but by the time they're visibly dirty,
toss them and use a new pair.  In between uses, you can use a plastic
film cannister to keep them from getting dirty, or any other small
plastic container. Even a ziploc bag works great.

<h3> My choice </h3>

For me personally, it's a toss-up between the 3M 1100s, which I've
used happily for years, the Howard Leight MAXes, and the Moldex Spark
Plugs.  All are large (fitting my large right ear canal well), all are
tapered cone shapes, and all are comfortable for me.

Because of the stupid packaging and the hard edge on the base of
the cone, the Spark Plugs are out.

Comparing between the 1100s and the MAXes, the higher NRR of the
MAXes takes on some importance.  As I put each plug in for a direct,
back-to-back comparison, I find that the most important factor is
actually the fit in my right ear, and the MAXes are a little bit
better.  Pressure of each plug is about equal, and I believe long-term
comfort will be about equal, with the MAXes possibly edging out the
1100s.

<h3> The winner </h3>

Ultimately, for myself, I am going to order a big box of the
Howard Leight MAX earplugs for my motorcycle use.

<h3> Update, May 2006 </h3>

I actually made this decision many months ago, but just now
realized I forgot to post the update here.

After several attempts to use the MAX plugs over the course of
a couple weeks, I kept having difficulty getting the right-side
plug to seat properly and seal.  Despite generally liking the MAX plugs
better, and finding them to be more effective, my ability to reliably
seat the 1100s had me ordering another box of the 3Ms.

I still recommend the MAXes over the 1100s, if they fit in your
ears.
<hr>
Copyright 2005-2006 by Ian Johnston.


==Other options==

The webBikeWorld [http://www.webbikeworld.com/Earplugs/earplugs.htm Hearing Protection] page has reviews and links to many pages of information on this topic.

Some club members have had good luck with the [http://www.cabelas.com/cabelas/en/templates/links/link.jsp?id=0037460227874a&type=product&cmCat=search&returnPage=search-results1.jsp&QueryText=earplugs&N=4887&Ntk=Products&Ntx=mode+matchall&Nty=1&Ntt=earplugs&noImage=0 Custom-Molded Earplugs] from Cabela's. A type of these are also available from [http://earplugstore.stores.yahoo.net/ The Earplug Store]. Wal-Mart has been known to carry them also, although whether or not they'll have them next week is anybody's guess. Look in the hunting section. Make sure you read the reviews on the Cabela's site. Some people like these; some don't.