Installing a not-exactly-stock shock: Difference between revisions

(2 intermediate revisions by the same user not shown)

Line 4:

*[[GSXR600 shock|See here]] for notes on installing a GSXR shock.

~~This article will demonstrate some~~ of ~~the modifications necessary~~ to ~~install~~ a ~~Fox shock with a piggyback reservoir design (~~the ~~oil reservoir is attached~~ to the ~~top of the~~ shock~~). Fewer mods will likely be necessary if you can get a Fox~~ with a remote reservoir.

'''Disclaimer''': For anyone debating about doing the GSXR or similar piggyback shock mod - Don't do it, unless you have a LOT of time or free access to a machine shop to do the requisite grinding and cutting to make it fit. You're much better off using the time to find a shock with a remote reservoir.

This shock is a Fox TC-R from a '99 GSXR750. Right picture shows both shocks. OEM is the wimpy-looking one.

This article will demonstrate some of the modifications necessary to install a Fox shock with a piggyback reservoir design (the oil reservoir is attached to the top of the shock). Fewer mods will likely be necessary if you can get a Fox with a remote reservoir like this one, which was used on a race EX250 from the early 90's. It was built for either the 250 or the EX500.

[[image:785662.jpg|100px]]

This piggyback shock is a Fox TC-R from a '99 GSXR750. Right picture shows both shocks. OEM is the wimpy-looking one.

[[Image:fox-01.jpg|100px]]

@@ Line 4: / Line 4: @@
 *[[GSXR600 shock|See here]] for notes on installing a GSXR shock.
-This article will demonstrate some of the modifications necessary to install a Fox shock with a piggyback reservoir design (the oil reservoir is attached to the top of the shock). Fewer mods will likely be necessary if you can get a Fox with a remote reservoir.
+'''Disclaimer''': For anyone debating about doing the GSXR or similar piggyback shock mod - Don't do it, unless you have a LOT of time or free access to a machine shop to do the requisite grinding and cutting to make it fit. You're much better off using the time to find a shock with a remote reservoir.
-This shock is a Fox TC-R from a '99 GSXR750. Right picture shows both shocks. OEM is the wimpy-looking one.
+This article will demonstrate some of the modifications necessary to install a Fox shock with a piggyback reservoir design (the oil reservoir is attached to the top of the shock). Fewer mods will likely be necessary if you can get a Fox with a remote reservoir like this one, which was used on a race EX250 from the early 90's. It was built for either the 250 or the EX500.
+[[image:785662.jpg|100px]]
+This piggyback shock is a Fox TC-R from a '99 GSXR750. Right picture shows both shocks. OEM is the wimpy-looking one.
 [[Image:fox-01.jpg|100px]]