Supporting Your Bike While Servicing: Difference between revisions
| Line 54: | Line 54: | ||
If you're buying a stand, the kind that supports the bike under the triple tree is more useful than the kind that goes under the forks: | If you're buying a stand, the kind that supports the bike under the triple tree is more useful than the kind that goes under the forks: | ||
[[Image:Fork seals2-2.JPG| | [[Image:Fork seals2-2.JPG|200px]] | ||
[[image:100_1393.jpg| | [[image:100_1393.jpg|200px]] | ||
'''3a)''' If you have access to an overhead beam, a ratcheting tie-down (with a large ratchet mechanism) can be strung between the top triple clamp and the beam (or two beams - see picture below). Run your strap under one side of the triple, around the rear of the steering stem, then under the triple on the other side and back up to the rafter. Make sure it pulls evenly on both sides of the triple. | '''3a)''' If you have access to an overhead beam, a ratcheting tie-down (with a large ratchet mechanism) can be strung between the top triple clamp and the beam (or two beams - see picture below). Run your strap under one side of the triple, around the rear of the steering stem, then under the triple on the other side and back up to the rafter. Make sure it pulls evenly on both sides of the triple. | ||
| Line 67: | Line 67: | ||
You don't need to disassemble anything for this option; it doesn't pinch or touch anything important, and it's fast. It's as stable as it gets when suspending a bike like this and on the center stand (meaning the front end swings a bit). Make sure you loosen any bolts while the front end is still on the ground. If your bike doesn't have a centerstand, you have to also use a rear stand. | You don't need to disassemble anything for this option; it doesn't pinch or touch anything important, and it's fast. It's as stable as it gets when suspending a bike like this and on the center stand (meaning the front end swings a bit). Make sure you loosen any bolts while the front end is still on the ground. If your bike doesn't have a centerstand, you have to also use a rear stand. | ||
[[image:IMG_2358.JPG| | [[image:IMG_2358.JPG|200px]] | ||
[[image:IMG_2354-2.JPG| | [[image:IMG_2354-2.JPG|110px]] | ||
'''4)''' If you just need to take the front wheel off, you can: | '''4)''' If you just need to take the front wheel off, you can: | ||