Cleaning the carbs 1: Difference between revisions

← Older edit Newer edit →

@@ Line 118: / Line 118: @@
 [[Image:Brian_Carb_Clean_12.JPG|150px]]
-When you take out the main jet, the emulsion tube (called 'holder' in the left picture) is behind it, and then a little-known part, the jet needle (also called 'collar'). Be sure you get these little parts out (part #16017 on the diagram), as they could fall out on their own if you don't.
+When you take out the main jet, the emulsion tube (called 'holder' in the left picture) is behind it, with the jet needle (also called 'collar') behind that. Be sure you get these little parts out (part #16017 on the diagram), as they could fall out on their own if you don't.
 [[image:Jim carb 2.jpg|150px]]