Installing a voltmeter: Difference between revisions

Revision as of 13:41, 25 December 2008 view source Bokonon (talk \| contribs) Bureaucrats, Administrators 9,915 edits No edit summary ← Older edit		Revision as of 21:45, 2 April 2010 view source Bokonon (talk \| contribs) Bureaucrats, Administrators 9,915 edits No edit summary Newer edit →
Line 53:		Line 53:

	The nighttime illumination is not that good, but it gives you three LEDs: red, amber, and green to indicate roughly less than 12.3v, between 12.3 and 12.7v, and over 12.7. You typically get all three when moving, two when stopped without the heaters or brake on, and only the red with either load added. You can't read the display well at night, and the LEDs are invisible in the daylight, so both display methods have merit.		The nighttime illumination is not that good, but it gives you three LEDs: red, amber, and green to indicate roughly less than 12.3v, between 12.3 and 12.7v, and over 12.7. You typically get all three when moving, two when stopped without the heaters or brake on, and only the red with either load added. You can't read the display well at night, and the LEDs are invisible in the daylight, so both display methods have merit.

			[[image:IMG_7082.jpg\|250px]]