I want to get some new pegs: Difference between revisions

Revision as of 02:02, 26 April 2009 view source Bokonon (talk \| contribs) Bureaucrats, Administrators 9,915 edits No edit summary ← Older edit		Revision as of 23:54, 28 May 2010 view source Bokonon (talk \| contribs) Bureaucrats, Administrators 9,915 edits No edit summary Newer edit →
Line 18:		Line 18:

	Changing pegs is easy. Remove the clip holding the pin that holds your pegs in place, then slide the pin out. The spring may want to go flying, so make sure you track it down. Put the spring in the new peg in the same way that it was in the old peg, slide the peg into the footpeg bracket, and slide the pin through the holes to hold it. Re-attach the clip (on some models it may be a cotter pin) to secure it. Repeat on the other side.		Changing pegs is easy. Remove the clip holding the pin that holds your pegs in place, then slide the pin out. The spring may want to go flying, so make sure you track it down. Put the spring in the new peg in the same way that it was in the old peg, slide the peg into the footpeg bracket, and slide the pin through the holes to hold it. Re-attach the clip (on some models it may be a cotter pin) to secure it. Repeat on the other side.

			If you want to go whole hog, you can get [[Woodcraft rearsets shifter adjustability fix\|Woodcraft rearsets]], which will move the pegs up and back, for that racer look and feel (for better or worse).