Tires 101: An Introduction: Difference between revisions

Line 170:

|-

|}

==Interpreting the sidewall data==

Line 187:

Line 188:

==Buying the right size==

So, what does all this mean when it comes time to go out and buy the tire? Well, it means a lot. First of all, in many cases the tire selection may be limited by the wheels on the bike, or the age and style of the bike. An excellent example of these limitations is found when attempting to find tires for a pre-1994 EX500, or ~~for~~ a Ninja 600 ~~(NOT the ZX-6)~~. Both of these bikes have relatively narrow 16 inch rims, but they are also meant to be more sporting motorcycles. The selection of quality rubber for these bikes is pretty limited. You will find the same thing when you go looking for tires for the Ninja 250.

So, what does all this mean when it comes time to go out and buy the tire? Well, it means a lot. First of all, in many cases the tire selection may be limited by the wheels on the bike, or the age and style of the bike. An excellent example of these limitations is found when attempting to find tires for a pre-1994 EX500 or a Ninja 600. Both of these bikes have relatively narrow 16 inch rims, but they are also meant to be more sporting motorcycles. The selection of quality rubber for these bikes is pretty limited. You will find the same thing when you go looking for tires for the Ninja 250.

In other cases, while the hardware may be capable of supporting a more current tire, the optimal sizes are not available. A good example of this is the 1986 VF1000R~~, that~~ has a 2.75x16~~.0 inch~~ front wheel and a 3.50x17~~.0 inch~~ rear wheel. The fitment of rear tires is not a problem -- any of the quality 140, 150, or 160 width radials will fit nicely. The slightly narrow front, however, really works best with a bias-ply tire. As for the EX250, there are good tires available, but they're not necessarily the "perfect" size. That's where the above charts come in handy. (See also the [[What tire makes are available that fit the 250?|Tire Models Page]]).

In other cases, while the hardware may be capable of supporting a more current tire, the optimal sizes are not available. A good example of this is the 1986 VF1000R. It has a 2.75x16 front wheel and a 3.50x17 rear wheel. The fitment of rear tires is not a problem -- any of the quality 140, 150, or 160 width radials will fit nicely. The slightly narrow front, however, really works best with a bias-ply tire. As for the EX250, there are good tires available, but they're not necessarily the "perfect" size. That's where the above charts come in handy. (See also the [[What tire makes are available that fit the 250?|Tire Models Page]]).

==Radials==

@@ Line 170: / Line 170: @@
 |-
 |}
 ==Interpreting the sidewall data==
@@ Line 187: / Line 188: @@
 ==Buying the right size==
-So, what does all this mean when it comes time to go out and buy the tire? Well, it means a lot. First of all, in many cases the tire selection may be limited by the wheels on the bike, or the age and style of the bike. An excellent example of these limitations is found when attempting to find tires for a pre-1994 EX500, or for a Ninja 600 (NOT the ZX-6). Both of these bikes have relatively narrow 16 inch rims, but they are also meant to be more sporting motorcycles. The selection of quality rubber for these bikes is pretty limited. You will find the same thing when you go looking for tires for the Ninja 250.
+So, what does all this mean when it comes time to go out and buy the tire? Well, it means a lot. First of all, in many cases the tire selection may be limited by the wheels on the bike, or the age and style of the bike. An excellent example of these limitations is found when attempting to find tires for a pre-1994 EX500 or a Ninja 600. Both of these bikes have relatively narrow 16 inch rims, but they are also meant to be more sporting motorcycles. The selection of quality rubber for these bikes is pretty limited. You will find the same thing when you go looking for tires for the Ninja 250.
-In other cases, while the hardware may be capable of supporting a more current tire, the optimal sizes are not available. A good example of this is the 1986 VF1000R, that has a 2.75x16.0 inch front wheel and a 3.50x17.0 inch rear wheel. The fitment of rear tires is not a problem -- any of the quality 140, 150, or 160 width radials will fit nicely. The slightly narrow front, however, really works best with a bias-ply tire. As for the EX250, there are good tires available, but they're not necessarily the "perfect" size. That's where the above charts come in handy. (See also the [[What tire makes are available that fit the 250?|Tire Models Page]]).
+In other cases, while the hardware may be capable of supporting a more current tire, the optimal sizes are not available. A good example of this is the 1986 VF1000R. It has a 2.75x16 front wheel and a 3.50x17 rear wheel. The fitment of rear tires is not a problem -- any of the quality 140, 150, or 160 width radials will fit nicely. The slightly narrow front, however, really works best with a bias-ply tire. As for the EX250, there are good tires available, but they're not necessarily the "perfect" size. That's where the above charts come in handy. (See also the [[What tire makes are available that fit the 250?|Tire Models Page]]).
 ==Radials==