Checking engine mount bolts: Difference between revisions
No edit summary |
No edit summary |
||
| Line 18: | Line 18: | ||
[[image:IMG_7012.jpg|150px]] | [[image:IMG_7012.jpg|150px]] | ||
[[image:IMG_7024.jpg|100px]] | [[image:IMG_7024.jpg|100px]] | ||
If you need to replace one of the nuts, they are Kawasaki part #92015-1180; NUT,FLANGED,10MM. Should you be looking for one at your local hardware store, you need size M10-1.25, which is 10mm with a pitch of 1.25. | |||
The front bolt does not have a nut; it screws directly into the front bracket. It is accessible from the left front side of the bike. You can fit a 14mm socket into the fairing vent, but you will need a ~6" extension to get a wrench on it. | The front bolt does not have a nut; it screws directly into the front bracket. It is accessible from the left front side of the bike. You can fit a 14mm socket into the fairing vent, but you will need a ~6" extension to get a wrench on it. | ||
[[image:IMG_7022.jpg|150px]] | [[image:IMG_7022.jpg|150px]] | ||