My LED turn signals don't work right: Difference between revisions
| Line 17: | Line 17: | ||
* [http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fflashers.htm Super Bright LEDs] part number LF1-S-PIN | * [http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fflashers.htm Super Bright LEDs] part number LF1-S-PIN | ||
To wire your new flasher, the wire that is orange with a green stripe is | To wire your new flasher, the wire that is orange with a green stripe is 12 volts in from Fuse 1 in the junction box. The solid orange wire runs out to the turn signal switch. | ||
Connect to the stock wires using crimp connectors and [http://faq.ninja250.org/wiki/Installing_connectors_for_your_wiring#Using_heat_shrink_tubing_to_cover_exposed_wire heat shrink wrap]. | Connect to the stock wires using crimp connectors and [http://faq.ninja250.org/wiki/Installing_connectors_for_your_wiring#Using_heat_shrink_tubing_to_cover_exposed_wire heat shrink wrap]. | ||