Installing emulators and springs: Difference between revisions
No edit summary |
No edit summary |
||
| Line 16: | Line 16: | ||
Step 2. Remove the cotter pin (if present, as it should be) and break loose the front axle nut with your breaker bar. | Step 2. Remove the cotter pin (if present, as it should be) and break loose the front axle nut with your breaker bar. | ||
Step 3. Remove the handlebars. Each bar is held by two hex bolts. It is not a good idea to let the handlebars dangle by the cabling, particularly in the case of the right handlebar and the brake line. There may be more elegant solutions, but just taping the left and right bars together with some masking tape over the instrument cluster works | Step 3. Remove the handlebars. Each bar is held by two hex bolts. It is not a good idea to let the handlebars dangle by the cabling, particularly in the case of the right handlebar and the brake line. There may be more elegant solutions, but just taping the left and right bars together with some masking tape over the instrument cluster works. | ||
[[image:18010131880.jpg|150px]] | [[image:18010131880.jpg|150px]] | ||