Oil Change Procedure: Difference between revisions

Revision as of 13:06, 19 June 2007 view source Bokonon (talk \| contribs) Bureaucrats, Administrators 9,915 edits No edit summary ← Older edit		Revision as of 14:14, 23 July 2007 view source Bokonon (talk \| contribs) Bureaucrats, Administrators 9,915 edits No edit summary Newer edit →
Line 39:		Line 39:

	As far as actual cleaning of the screen goes, you can pretty much just wipe the screen clean with a rag. If you do need to spray it, WD-40 works fine. There are no gaskets to worry about. Just remove, clean, and replace.		As far as actual cleaning of the screen goes, you can pretty much just wipe the screen clean with a rag. If you do need to spray it, WD-40 works fine. There are no gaskets to worry about. Just remove, clean, and replace.

			'''Pay careful attention to torque.''' Since these bolts aren't mentioned in the [[Torque Values\|torque values guide]], you have to use the generic value for bolts with a 6mm thread, which is 60 in-lbs. Bolts have been known to shear off when using the values for the oil drain bolt (170 in-lbs), or the generic value for 8mm threads (144 in-lbs). The bolt head is 8mm, but the threads are 6mm.