Ninja250Wiki

Installing an accessory fuse box: Difference between revisions

← Older editNewer edit →
Line 87: Line 87:
'''''This diagram needs a few more details; Ryan says "It could use the pins that you need to attach to and where the wires are going".'''''
'''''This diagram needs a few more details; Ryan says "It could use the pins that you need to attach to and where the wires are going".'''''


[[image:aux fuse box diagram.gif|150px]]
[[image:aux fuse box diagram.gif|150px]]  
 
Kinda like this
 
[[image:aux fuse box diagram-2.gif|150px]]
 
'''''>>Ryan - Basically, yes.  Most references have the battery power hooked directly to the 30 pin and the power to the fuse block coming from the 87 pin but it isn't "required" to do so, they can be switched like in Elmer's edited diagram. This would also better correspond to later references in this article.'''''
 
***I did my diagram last thing before I went to bed, and I'm kinda sick. Mine has 87 & 30 in the wrong place, and woot has since said that the tail light is better to hook into, although we have a better step-by-step and pictures for the horn circuit.


First, wire up the relay. Do this before you install it, so you don't have to take stuff apart if it doesn't work.  
First, wire up the relay. Do this before you install it, so you don't have to take stuff apart if it doesn't work.  
Retrieved from "https://www.ninja250.info/wiki/Installing_an_accessory_fuse_box"