I want a louder horn: Difference between revisions

Line 128:

Diagram: [[image:Stebel Horn Schematic.pdf|Stebel horn schematic]]

The [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Store_Code=CST&Product_Code=Stebel11135&Category_Code= Stebel Nautilus Compact] is a 12VDC electro-pneumatic horn drawing 18amps. Finding an area to install the horn on the Ninja 250 is somewhat problematic. For this installation, I chose the area alongside the left-hand cylinder, underneath the cowling, as this allows the horn to be mounted out of sight, remain reasonably well protected from the weather, and allow the blast of sound to escape with minimal interference. I designed a simple bracket that attaches to the left-hand ignition coil mounting bolts. Here ~~is a photo~~ of the bracket and Stebel installed on the Ninja 250.

The [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Store_Code=CST&Product_Code=Stebel11135&Category_Code= Stebel Nautilus Compact] is a 12VDC electro-pneumatic horn drawing 18amps. Finding an area to install the horn on the Ninja 250 is somewhat problematic. For this installation, I chose the area alongside the left-hand cylinder, underneath the cowling, as this allows the horn to be mounted out of sight, remain reasonably well protected from the weather, and allow the blast of sound to escape with minimal interference. I designed a simple bracket that attaches to the left-hand ignition coil mounting bolts. Here are some photos of the bracket and Stebel installed on the Ninja 250.

[[image:~~668263~~.jpg|150px]]

[[image:Stebel Bracket Layout.pdf]]

[[image:Stebel_Install_010.jpg|150px]]

[[image:Stebel_Install_014.jpg|150px]]

[[image:Stebel_Install_008.jpg|150px]]

Electric power is supplied via a new circuit from the battery, with a 20amp fuse and 12VDC relay. the relay coil is triggered by the original horn switch and wiring harness. This is the same as for the replacement horns described above.

[[image:668263.jpg|150px]]

Stebel_Install_004.jpg|150px]]

Stebel_Install_006.jpg|150px]]

[[image:667988.jpg|100px]]

'''J model'''

@@ Line 128: / Line 128: @@
 Diagram: [[image:Stebel Horn Schematic.pdf|Stebel horn schematic]]
-The [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Store_Code=CST&Product_Code=Stebel11135&Category_Code= Stebel Nautilus Compact] is a 12VDC electro-pneumatic horn drawing 18amps. Finding an area to install the horn on the Ninja 250 is somewhat problematic. For this installation, I chose the area alongside the left-hand cylinder, underneath the cowling, as this allows the horn to be mounted out of sight, remain reasonably well protected from the weather, and allow the blast of sound to escape with minimal interference. I designed a simple bracket that attaches to the left-hand ignition coil mounting bolts. Here is a photo of the bracket and Stebel installed on the Ninja 250.
+The [http://www.casporttouring.com/store/merchant.mvc?Screen=PROD&Store_Code=CST&Product_Code=Stebel11135&Category_Code= Stebel Nautilus Compact] is a 12VDC electro-pneumatic horn drawing 18amps. Finding an area to install the horn on the Ninja 250 is somewhat problematic. For this installation, I chose the area alongside the left-hand cylinder, underneath the cowling, as this allows the horn to be mounted out of sight, remain reasonably well protected from the weather, and allow the blast of sound to escape with minimal interference. I designed a simple bracket that attaches to the left-hand ignition coil mounting bolts. Here are some photos of the bracket and Stebel installed on the Ninja 250.
-[[image:668263.jpg|150px]]
+[[image:Stebel Bracket Layout.pdf]]
+[[image:Stebel_Install_010.jpg|150px]]
+[[image:Stebel_Install_014.jpg|150px]]
+[[image:Stebel_Install_008.jpg|150px]]
 Electric power is supplied via a new circuit from the battery, with a 20amp fuse and 12VDC relay. the relay coil is triggered by the original horn switch and wiring harness. This is the same as for the replacement horns described above.
+[[image:668263.jpg|150px]]
+Stebel_Install_004.jpg|150px]]
+Stebel_Install_006.jpg|150px]]
 [[image:667988.jpg|100px]]
 '''J model'''