Lowering the bars on a budget: Difference between revisions
No edit summary |
No edit summary |
||
| Line 13: | Line 13: | ||
WARNING: Kawasaki's usual [http://faq.ninja250.org/wiki/Removing_%26_replacing_bar_ends#Removal|Big Bunch O' Red Loc-Tite] is on the bolt holding the bar in the riser. | WARNING: Kawasaki's usual [http://faq.ninja250.org/wiki/Removing_%26_replacing_bar_ends#Removal|Big Bunch O' Red Loc-Tite] is on the bolt holding the bar in the riser. | ||
With clip-ons, there is the problem of the bars hitting the tank at full lock. With these, it's close to the tank on the right side (but not hitting). It's aso pretty close turning turn to the left, but the brake line attached to the master cylinder hits the instrument panel first. | |||
Lower than stock; higher than clip-ons. | Lower than stock; higher than clip-ons. | ||